|
|
#1
|
||||
|
||||
LRP Firmware w/Windows 10
Had a small issue trying to update the firmware on my LRP flow.
The firmware has only been tested up to Windows 7 which meant I had an issue using Windows 10 where the software wouldn't recognise that the ESC was connected. I had a search about on-line and found a good video about similar issues with Windows 8.1. In short if you have this issue just right click the LRP Fimware update tool icon, go to trouble shoot compatibility, select use recommended settings and it's fixed Really simple but took me a while searching about so hopefully this may save others a bit of time. |
#2
|
|||
|
|||
Quote:
__________________
Ardgay Models Schumacher CORE-RC Hobbywing Mark One Designs |
#3
|
||||
|
||||
I used a different browser (Firefox) on windows 7 and it worked/updated fine.
|
#4
|
||||
|
||||
I've tried all sorts and am ready for throwing it out off the window 😬😬😬
I've got windows 10 and every time I try connecting it just closes the window. Help!!!! |
#5
|
|||
|
|||
Quote:
I have even sent an email to LRP and I have had no response back. |
#6
|
|||
|
|||
That's cause the issue is on Windows 10.
__________________
Ardgay Models Schumacher CORE-RC Hobbywing Mark One Designs |
#7
|
||||
|
||||
Basically running Windows XP on Virtual Machine with W8ndows 10 will sort that issue. Im using it and have no problem with updating speedo. Hope that will help guys.
__________________
facebook.com/rogergrafix |
#8
|
||||
|
||||
Could you explain that in an idiots guide...?
__________________
Team Associated B6 Team Associated B5m Centro C4.2 Team Associated B4.2 RC10 Worlds |
|
|