|
|
#1
|
||||
|
||||
New batch of CR2 XXX conversion kits - ideas
Hi guys,
So I don't want to mess about with it too much, but I had the following ideas: Add some extra holes in the chassis to allow: Saddles to be mounted a little further forward. A shorty to be mounted across the chassis. A shorty to be mounted inline with the chassis. Looking at it some of those layout options might require a low profile servo. Thoughts? Thanks, G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#2
|
|||
|
|||
All shorty options across and down middle fowerd and back options
|
#3
|
||||
|
||||
All based upon the Extended wheel base CR2 atomic did.
All with shortys. one option with short servo
__________________
_____________________________________________ Kyosho TF2 Kyosho TF3 Kyosho TF4-R Kyosho Lazer ZX-R Mk2 Kyosho ZXR Kyosho zx Kyosho Lazer 2000 (with zx parts) Atomic CR2 SCT _______________________________________________ Trader Feedback thread |
#4
|
||||
|
||||
Having had a number of CR2s and Having a CR2T made they were the best 2wd I have owned......
The only real problem I see is getting hold of the XXX-NT Front kick-up plate for the front. Without this your in the brown stuff...... |
#5
|
||||
|
||||
Could use b5m front end altho detracts from it a bit. if you wanted keep it pure losi you could use one of these...
http://www.exotekracing.com/exo22-7075-nose-plate/
__________________
_____________________________________________ Kyosho TF2 Kyosho TF3 Kyosho TF4-R Kyosho Lazer ZX-R Mk2 Kyosho ZXR Kyosho zx Kyosho Lazer 2000 (with zx parts) Atomic CR2 SCT _______________________________________________ Trader Feedback thread |
#6
|
||||
|
||||
Ah rite ok, so what front end fixing kick up will it allow/have....
|
|
|