|
|
#1
|
||||
|
||||
RC10 Gearing.
Hi all you RC10 Pro's.
Can any of you help with the Gearing of the RC10 Worlds. I will be running a 13.5 and I'm wondering what size pinion to run with a 81t spur. Any help appreciated.......
__________________
http://www.oople.com/forums/showthread.php?t=83767 TRADER FEEDBACK **** 5 Metres Speed Swimming Champion 1976**** |
#2
|
||||
|
||||
Going from the re re manual . 28/81 blinky 19/81 if boosted .
__________________
|
#3
|
||||
|
||||
Awesome Roscopeco, thank you ...........
__________________
http://www.oople.com/forums/showthread.php?t=83767 TRADER FEEDBACK **** 5 Metres Speed Swimming Champion 1976**** |
#4
|
||||
|
||||
That's a big jump from 19t to 28t.....
I would think 19 is too small unless you have a massive amount of boost.. With 13.5t I would try around 25 and go from there..depending on the track..
__________________
Team Associated B6 Team Associated B5m Centro C4.2 Team Associated B4.2 RC10 Worlds |
#5
|
||||
|
||||
I agree I’d personally run around 25/81 . I run a 19t spec motor in mine at 24/81 and that’s spot on .
__________________
|
#6
|
||||
|
||||
I ran 31/81 at Brett Davies Cup with 13.5 with blinky
Car was great. Didn't get hot. Geared up all day. Thumbs weren't as good as the car. Remember, on touring car FDR on 13.5 is 5 or 5.5 as a starting point. The motor should be ok with that on a light a 2wd buggy
__________________
Last edited by bretts; 09-03-2019 at 08:26 AM. |
#7
|
||||
|
||||
Ok lads thank you.
I did think it was a big jump between the pinions. Think I will go with 24-25 as start and see from there. Thank you all.....
__________________
http://www.oople.com/forums/showthread.php?t=83767 TRADER FEEDBACK **** 5 Metres Speed Swimming Champion 1976**** |
|
|