|
#1
|
|||
|
|||
B6 Mip gear diff roller pucks
Hi, can anybody tell me if I can directly change the roller puck to the orange colour ones? I'm running the gear diff puck kit
I've tried to get a answer from mip but had no reply at all Thanks in advance
__________________
Schumacher kc LD Tekno EB410 |
#2
|
|||
|
|||
What's wrong with your roller pucks? I've just changed from kit to roller pucks. Not tried them yet.
Not sure about the plastic pucks. Looking at photos the shaft and outdrive looks to be a similar size.... |
#3
|
|||
|
|||
Looking at the photos again, the drive shaft and pin seem to have flats on it. I think you will need a new kit.
|
#4
|
||||
|
||||
No they don't.
You need a different pin, but otherwise it's the same fitment in the out drives for both roller and plastic pucs.
__________________
It's nice to be important, but it's more important to be nice! CML - Team Associated - Reedy - Savox - Nuclear RC - Schumacher Racing CML UK Team Driver - Team Associated B6.1 - T6.1 - B64 - B6 A State Of RC podcast presenter www.astateofrc.com [url]https://www.facebook.com/groups/483687655122491/[url] https://www.youtube.com/channel/UCWQ..._as=subscriber |
#5
|
|||
|
|||
I noticed they made the orange pucks in a slightly taller size, minimising the chance of the screws coming into contact with the outdrives.. the roller pucks look very close to the outdrives...I've not had them in long so time will tell, but
Looking at there website it looks like they only offer the rolller puck for the gear diff kit and orange pucks for the ball diff kit? Any idea which pin gupz? Cheers
__________________
Schumacher kc LD Tekno EB410 |
Thread Tools | |
Display Modes | |
|
|