|
#1
|
||||
|
||||
Good base set-up for CR2 with XXX rear end?
As per the title really can any recommend a good starting set-up for the CR2, but fitted with the XXX rear conversion?
|
#2
|
||||
|
||||
What kind of track? ArnO has posted some of my set-ups on Petit RC: http://www.petitrc.com/setup/atomicc...CarbonCR2.html
Pick a set-up from Wouter Wynen, Danny McGee or me and you'll have a good starting point. Wouter and me have used the XXX rear suspension the entire season (albeit with CR hubs most of the time). |
#3
|
||||
|
||||
Thanks V-Rossi, I've raced a few times now at Moto Arena on the mixed indoor surface there (Carpet & Tarmac) - I left the set-up as I had brought it, which it appears would have been very similar to the top set-up from Danny Mcgee, however it just felt over damped. I've now dropped the oil weight to 30 all round (red pistons in the front & black rears) - but other than that, most of the settings seem to be there or there abouts the same as Wouter's Oople set-up for astro.
I think the main thing for me is practice, practice & more practice |
|
|