B3/B2 Drive shafts
Hi All,
After some drive shafts for a B3 project, would prefer CVD (9276), but would consider the stub axle (6374) and dog bones (6370 - have seen some on ebay for 15 quid, but didn't want to buy in-case I can't get stub axles or someone has some CVD going).
Just a buggy I'm looking at completing for a friend to run at South Lakes vintage (if there's any spaces left for him).
Another thing I've thought about is to get some of the universal one's from HK for under a tenner, but need to confirm measurements - anyone point me to a drawing with dims on or can measure some for me. I can get vernier's on the bearing bores for the stub axles.
Cheers,
AndyRids
__________________
Andy Ridley
Losi 22 4.0, 22, XXCR, Losi 8 2.0EU, Tamiya F103GT,
Mardave V12 (stock, brushless & Caterham), Mardave Cobra & Team Associated B3.
Last edited by AndyRids; 21-06-2021 at 04:07 PM.
|
04-06-2021
Linear Mode
