|
#1
|
||||
|
||||
Help with battery straps
Hi all
I need some battery straps to convery my Schumacher Cat98 to take Lipo saddles as the nicd straps don't fit a lipo. So I was wondering if some of you fellow saddle pack users would be able to measure the length of your saddle straps and post the results on this thread as well as the make of thr car, the model and if possable the part number for the straps. The measurements need to be from the center of each mounting hole and in millimeters would be better. Thanks very much Josh
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#2
|
||||
|
||||
Can you just washer up the bottom of the supports to get more wrap around? That's what I did when using the Schumacher straps on my X5. Or when new the sraps were actually long enough to go over 4 cells but everyone cut them back for 3, so as new they are a lot longer (perhaps too long to be fair.
Dan
__________________
Nortech is ACE! |
#3
|
||||
|
||||
Thanks Dan i'll try that as the straps are still long enough but I would prefer carbon straps and proper battery posts as there will be less chance of them coming undone.
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#4
|
||||
|
||||
Straps
Associated have straps and posts with thumb screws not sure of part numbers off the top of my head but a search on google or thro a model shops b44 spares section , they even have a tray but not sure if this will be usable for you. The only problem is the threads will be imperial but maybe you can live with that ! Hope this helps
|
|
|