|
#1
|
|||
|
|||
b44.1/b4.1 question
just a quickie here just wondering what tools i need (hex drivers/nut drivers) to build and maintain my b44.1/b4.1 havnt decided which yet and with regards to the b44.1 what length of sensor wire will i need.
james
__________________
Agama A8 Fr Alpha engines Savox servos Speed Passion Airtronics JC Racing Paint by The Chef Graphic skins by RC DC |
#2
|
||||
|
||||
Hex drives needed for a b44 are 0.50, 1/16, 3/32 & 5/64, probably the same for a b4 as both cars are imperial
Can't remember the nut driver sizes When i had mine i used a 8cm sensor cable but it was a very tight fit so maybe a 10cm one would be better
__________________
A rc car is not just for christmas, it's for life
|
#3
|
|||
|
|||
but are the b44.1/b4.1 still imperial? or have they gone metric?
james
__________________
Agama A8 Fr Alpha engines Savox servos Speed Passion Airtronics JC Racing Paint by The Chef Graphic skins by RC DC |
#4
|
||||
|
||||
Still imperial
__________________
A rc car is not just for christmas, it's for life
|
#5
|
|||
|
|||
thanks mate for clearign that up.
anyone know the nut driver sizes for the b44.1/b4.1? james
__________________
Agama A8 Fr Alpha engines Savox servos Speed Passion Airtronics JC Racing Paint by The Chef Graphic skins by RC DC |
#6
|
||||
|
||||
Nut drivers:
3/16" for the small lock nuts and the small plastic nuts on the shocks. 1/4" for the b4 slipper and large size 4-40 nuts. 11/32" for the b4 rear wheels and the front and rear wheels on the b44. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
|
|