|
#1
|
||||
|
||||
Tco2C evo kit ... 14 mm or 12mm hexes?
As title, does the TC02C evo kit come with 14mm wheels like the TM2v2 on the rear axle or 12mm like the original TC02c?
Also, does the kit come with yellow wheels like the box art? Chris
__________________
PR Racing - Insidelinemodels - RC Concept - LMR - BMM Racing - MB Models |
#2
|
||||
|
||||
12mm fitment, not sure about wheel colour as I bought the conversion kit.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#3
|
||||
|
||||
White wheels in the kit
|
#4
|
||||
|
||||
Thanks lads,
Does anyone know whether you can run the 14mm hex wheels from the tm2v2/tm4 on the tc02c evo by just swapping to a 14mm rear hex or not? I have loads of 14mm wheels so would rather not have to buy a raft more Chris
__________________
PR Racing - Insidelinemodels - RC Concept - LMR - BMM Racing - MB Models |
#5
|
||||
|
||||
not sure on evo yet, but on tco2c we used the axles and hexes from tm2v2 to use 14mm hex.
__________________
Mattys the driver,my names carl
|
#6
|
||||
|
||||
You can do but you need to use axles from TM4/TM2v2
__________________
Team Associated Hobbywing SRT Reedy My feedback http://www.oople.com/forums/showthread.php?t=63097 |
#7
|
||||
|
||||
I have made 14mm hex adapters to fit the TC02C so that I could use old Schumacher wheels. I made them in two thicknesses so that I could achieve full width track when using mini-spikes.
What offset are your wheels? Are the 12mm and 14mm the same offset? Last edited by Clive Loynes; 24-09-2014 at 10:46 AM. |
#8
|
||||
|
||||
Thanks for that lads,
Looks like running the tm2v2 axles is the most simple option. Chris
__________________
PR Racing - Insidelinemodels - RC Concept - LMR - BMM Racing - MB Models |
|
|