|
#1
|
||||
|
||||
Different Rear Arms???
Hello everyone...
I was checking the AE part numbers for the B4.1FT and I realized that there are three different part numbers! OK I know that ASC9583 Team Associated Rear A-Arm, Carbon (2) (B4) are carbon composite BUT what is the difference between ASC9764 Team Associated Rear Arm (B4/B44) And the stock ones ASC9582 Team Associated Rear A-Arm (2) (B4) If anyone knows please let me know... Regards Argi
__________________
Team Kyosho-Proline Racing-Team Orion-LRP-Maugrafix-ZWorks.tk-Rudebits-Ghea Racing |
#2
|
||||
|
||||
From my understanding.
The B44 arm is the softest, also has the two mounts for the roll bar. (B44 roll bar & b4) The stock B4 arm is medium, with no moulding for the B44 roll bar. The B4 Carbon arm is the stiffest, with no moulding for the B44 roll bar. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
|||
|
|||
Quote:
BTW, the b4.1 default arms generate a massive amount of rear end grip compared to the old 9764 arms I have. A bit too much imho :-) |
|
|