|
#1041
|
||||
|
||||
What's the diff ratio on the car? 2.5 like a b44?
How big is the track? gearing is all about balancing the size and layout of the track.
__________________
Tekin Team Manager |
#1042
|
|||
|
|||
Quote:
Randy, internal ratio is 2.35 and the track is slippery clay, medium size. I was running a Castle creations mamba max 5700Kv system in it before with a 9.87 FDR. I was thinking, since the 7.5T is rated at 6100Kv, of booting the FDR up to 10.5-11, and take it from there? What do you think? Higher, lower? Thanks for your dedicated help on this board as well as on others! |
#1043
|
||||
|
||||
I have here now 3 RS Pro ESC that are dead or flippin'.
1st: DIA, had suffered from a mis-connection of the wires on the lipo, which is quite deadly, as we all know, especially of you only discover your mistake after about 10 seconds 2nd: Flipping: this is my oldest ESC, raced it for years, .. and now does strange things, looses power, makes the engine get very hot, even destroyed an BL engine, 3th: Flipping: not functioning properly all the time, can run smoothly for some time, almost all the stint and then suddenly "loose connection"-LED-signal .. all though the Spektrum-receiver still shows his conecction-led AND the steering still functional. ANy chances of recovery/repair if I send those at Tekin?
__________________
aka Ludo |
#1044
|
||||
|
||||
Quote:
I'd stick with a FDR around 10.2 or so to get started. Run something like this setup: http://www.teamtekin.com/hotwire/ESC...r_7.5_4mod.pdf
__________________
Tekin Team Manager |
#1045
|
||||
|
||||
Quote:
__________________
Tekin Team Manager |
#1046
|
||||
|
||||
about 3th ESC: I'm using a Spektrum Radio DX3R and Spektrum receiver + Spektrum capacitator (because indeed I had issues in the past while using Savox-servos. But after the use of that capacitator I never experienced any errors anymore)
I'll test the 2nd one. ABout 1th: Quote:
Or should I send it in and will I get a new ESC for a lowered price? (Bacause AFAIK a new RS Pro costs about $200.)
__________________
aka Ludo |
#1047
|
||||
|
||||
If you're using the mini spektrum receiver try one of the new DSM2 capable ones. I had a micro do just as you describe to me.
#3, send it in, for $105 you'll get a brand new one.
__________________
Tekin Team Manager |
#1048
|
|||
|
|||
Hi, just looking for some clarification on something...
The RS Pro can be set so that i can run a motor in reverse orintation without the need for an extra idler gear can't it? I hope that makes sense... Many thanks Chris |
#1049
|
||||
|
||||
yes, on the hotwire you can set it to reverse rotation.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1050
|
||||
|
||||
Yes, i believe you can set the motor to reverse mode with the Hotwire
__________________
{CML Distribution} {Penguin Bodyshells} |
#1051
|
|||
|
|||
Phew - big relief! Thanks for the quick response fellas.
Chris |
#1052
|
|||
|
|||
Quote:
__________________
HostMonster Coupon |
#1053
|
||||
|
||||
The RS and RS Pro are the same basic esc, the Pro having a lower resistance and can take hotter motors. BOTH can run either sensored or sensorless.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1054
|
||||
|
||||
Is there a normal/offroad firmware? Like Speedpassion has separate stock and 'normal' firmware I would also like to have 'normal' firmware. I really deeply hate the advanced Timing and Boost thingies and I can't seem to get the timing shizzle off, it always feels a need to come in and give it an extra push.
I don't want a rocket on the straight or a sudden gain in speed. Just a normal, smooth linear ESC, with good brakes. I have tried multiple settings and I don't like any of them. edit: reading this: http://www.teamtekin.com/hotwire_RS.html Quote:
+ dual mode please confirm or give additional 'how to'
__________________
www.rc-offroad.be Never argue with a stupid man. He will drag you down to his level and beat you because of his experience. Last edited by Cooper; 23-05-2011 at 12:09 PM. |
#1055
|
||||
|
||||
Blinky mode works fine for some. Simply not using turbo in offroad should be smooth enough without any weird peak'iness in the car.
__________________
Tekin Team Manager |
#1056
|
|||
|
|||
Could i buy a new case for my Tekin RsPRO?
|
#1057
|
||||
|
||||
Yes, they are available separately. Not sure on the code but i got one from Tekin last year
__________________
{CML Distribution} {Penguin Bodyshells} |
#1059
|
|||
|
|||
hotwire setup
Hi what is the recomended setup for a 7.5t hpi flux pro motor in a B4 for a track like batley outdoors/grass/astro. Also what sort of gearing should I be looking at. Sorry for all the dumb question this is my first brushless setup. Also the sensor wire that came with the motor is a bit stiff and pop out of the rs pro connection holder has anyone got a solution for this?
Thanks |
#1060
|
||||
|
||||
Tekin FX
deleted - sorted
__________________
Oople Trader Feedback |
|
|