|
|
#1
|
|||
|
|||
H2 PRO RESULTS SO FAR
So let's go through the results so far with the H2 PRO has anyone been making progress with it?
__________________
2x club race winner modified TC 2006 yrcmcrc 2011 TC electric club champion |
#2
|
||||
|
||||
Used it for two meetings so far on astro.
Improved loads the 2nd meeting as I managed to strip 2x spur gears in the first as the pinion wasn't working for me so changed it. I am having trouble with getting speed through corners without it either lifting a wheel or rolling. The tyres should be worn in from the meetings now. Any advice? Dave |
#3
|
|||
|
|||
Quote:
__________________
2x club race winner modified TC 2006 yrcmcrc 2011 TC electric club champion |
#4
|
||||
|
||||
Well I stripped two 76 teeth spur so has to change it.
I have 82 spur with a 21 pinion on a 6.5t motor. Not sure what I could change really It runs fine straights and slow cornering but I can't throw it in with speed. Dave |
#5
|
|||
|
|||
To much power is not the key 6.5 is a lot that's my personal view, have u tried putting 1 degree camber on rear and 0 on the front that should also work but try this with the standard 7.2 layout
__________________
2x club race winner modified TC 2006 yrcmcrc 2011 TC electric club champion |
#6
|
||||
|
||||
Ill give that a try.
To be honest, i have turned the top end down as im not used to the speed yet! Most of the guys use 6.5 to 7.5. Im using full size stick. Its balanced well, just gotta get the handling through the corners faster |
|
|