|
#1
|
|||
|
|||
hobbywing/bullistorm esc repairs
Hi, is there anyone repairing these ESC IN THE uk ?
|
#2
|
||||
|
||||
derek bailey will do genuine HW stuff i think because my mate has an extreme stock currently being repaired
bullistorm i doubt are worth repairing i have two and if they pop they will be in the bin you could try pugs on here he plays with dead stuff regards dave |
#3
|
|||
|
|||
Contact details for Derek Bailey, please? I have a genuine HW 120A 1S with no brakes!
|
#4
|
||||
|
||||
derek contact
pm sent
|
#5
|
|||
|
|||
Are u running the brakes at 100% if so turn them Down to 75% believe me it makes a major difference
|
#6
|
||||
|
||||
Hi,
I'm with Fid on this if it's a Bullistorm. I'm repairing a Bullistorm 60A at the moment and the FETs and FET drivers come to nearly as much as the unit and that's without labour. Luckily I'm fixing for myself as a test, rather than for a client. Ian |
#7
|
||||
|
||||
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#8
|
|||
|
|||
Thank you Fidspeed and Mark, details noted. Only noted because...
If you turn the brake travel down to zero on your Tx by the seamless act of stupidity that is leaning on the button while trying to balance the Tx and your car on your lap at the same time, then it should come as no surprise that the car has no brakes!!! If you turn it back up again, the brakes return... |
#9
|
||||
|
||||
great news saves a repair !!
as quoted by a sage on here somewhere "never argue with a stupid man he will wear you down and beat you on experience " |
#10
|
|||
|
|||
|
|
|