|
#1
|
||||
|
||||
First attempt a wrapping a shell.
__________________
race it like you stole it |
#2
|
|||
|
|||
Not bad at all!
|
#3
|
||||
|
||||
losi 22
Did you only use carbon sticker?
|
#4
|
||||
|
||||
its a vinyl sheet off ebay, its good stuff, just learning to use it.
__________________
race it like you stole it |
#5
|
|||
|
|||
Have you a link at all to the type of stuff you used fella? Been looking for something like this
|
#6
|
||||
|
||||
Are you doing it in one piece or multiple bits ? If you're doing it in multiples you might be able to put in inside, or is the back not the same colour ???
It looks like you're getting on fine, I might be able to offer some advice though. Warming it with a heat gun / hair dryer as you do it will help. Also if you can make it the same shape as the body, imagine it was something you were cutting out of a magazine when you were younger, then you'd fold along the dotted lines and glue tabs together, well if you can do something like that and create a template you should be able to do it all in one sheet. Will be interested to see how it comes out. |
|
|