|
#1
|
||||
|
||||
WANTED: Losi Pro SE
I'm after a Losi Pro SE to fit my XX retrofit gearbox to, so not after a JRX.
Will be a runner so doesn't need to be mint. (Also doesn't actually need to the have the gearbox as long as the rest of it is there). Cheers. |
#2
|
||||
|
||||
I believe the retro-fit gearbox fits the JRX2/Pro also - but you may need to consider driveshafts - if the outputs of your diff halves accept dogbones you will need to correct shafts also (since all the JRX series buggies came with sliders)
__________________
TeamC TM2 (V1) Xray T4 15' (I finally conformed!) Associated R5.1 1/12th Pan Car (Occasional Racer) + too many vintage racers to list! |
#3
|
||||
|
||||
Hi Dan,
Yep, I've got the driveshafts too The problem with fitting the XX gearbox is it needs a hole cut in the chassis for the lowered diff gear to sit in - and I'm no prepared to do that to my JRX2. Where-as I have no issues cutting a hole in a plastic Pro SE chassis |
|
|