|
#1
|
||||
|
||||
Stronger CVA Wheel Hex Pin
Hello,
I'm looking for some stronger hex pins after destroying so many on my b5m. I've upgreaded the hex's to the alloy ones and the stock plastic ones were striping after a few runs. Can anyone advise me on stronger ones that will last more than a few race mettings? Has anyone else had the same problem? Thanks Alex |
#2
|
||||
|
||||
sounds more like uve built something wrong. My B5M has had about 7 hours of track time and not had to replace a single pin or hex. they are not even worn
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#3
|
||||
|
||||
The standard hex on the rear should of gone before the pin you would think
__________________
|
#4
|
|||
|
|||
Over tightening wheel nuts can snap the pins. Especially if you've missed spacers, or the axles need shimming.
|
#5
|
||||
|
||||
Thanks for the replies, does anyone know the size of the shims that I would need to get?
|
|
|