|
#1
|
|||
|
|||
Has anyone tryed the new 410 v5
What are People's reaktion on the new v5
|
#2
|
|||
|
|||
yes ive done a little bit of practice outdoors on astro and raced it tuesday indoors on carpet and it was really good, hopefully race it tomorrow outdoors which should be good.
|
#3
|
|||
|
|||
Yes i have run it for a little while now, it has as much if not more steering than the v4, but the rear end and acceleration is so stable which makes the car so stable and easier to drive while still having the steering!! #winWin
__________________
Team Durango - DNX8 - DEX8 - DEX410v5 - DEX210F - DEX210v3 - Novarossi - Beta - Futaba - Hudy - Orion |
#4
|
|||
|
|||
First proper race yesterday and very impressed, highly recommend it.
|
#5
|
|||
|
|||
410 v5
Sounds very good:, but I just don't understand the new layout. The old 410 is a very aggressiv car, what about the v5. Longer, wider and so one 😀is this a good thing or...
|
#6
|
|||
|
|||
Can I use Asso 12mm springs with Durango big bore shocks?
__________________
Atomic Carbon S2 swb B4 Hara edition Durango 2007 replica ( http://www.oople.com/forums/showthread.php?t=163715 ) |
#7
|
||||
|
||||
The Durango springs are just a tad smaller (0.5-1mm); they don't properly fit on Asso shocks, but the other way around might work.
If they don't fit well enough though, not to worry: The Durango and Asso spring nuts (that go on the shock bodies) are interchangeable as they have the same diameter and thread. If you also need other spring cups to make it work, I would have a set 3D printed. |
|
|