|
#1
|
|||
|
|||
'92 Works Re-Build
So I thought I'd start a new thread with the re-build of my '92 garage find.
Spent the afternoon with this and a few beers, don't tell the missus, have the drive train in the cleaning room but the chassis is almost there, gona hit ebay and google tonight to find some ball joints and screws. Have used the nylon bulkheads of my YR4, as the alloy one had too much slop to be a runner, might machine the rear down for a '93 WCS? Last edited by Dr XX; 10-03-2018 at 08:10 AM. Reason: Incorrect model year |
#2
|
||||
|
||||
It’s a works 92 you’ve got there with a 91 front tower if you thought your 94 project was going to be hard a WCS will be worse
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863 |
#3
|
|||
|
|||
Thread amended to correct year..
|
#4
|
|||
|
|||
So getting back around to my Yoke build now, and wanted to know what length RC10 shocks I need to get hold of? Is it 1.02 on the front and 1.32 on the rear?
|
|
|