|
#1
|
||||
|
||||
Lipo balance charger help!!
Hi we have just bought a Tamco AB450D balance charger and want to know how to hook the sensor lead from the battery? This is the jack on the side of the charger..... do I need another lead or adapter between the two?
__________________
Kyosho Lazer ZX Academy STR-4 PRO Team Associated B44.1 Factory Team |
#2
|
||||
|
||||
Quote:
Think your needing a balance board to plug in first which will have ports on them like this........ http://www.wheelspinmodels.co.uk/i/85044/
__________________
AKA Dexter Ex Club Chairman Visit our Face Book Page for address and to book in https://www.facebook.com/groups/289589121226171/ http://www.neamotorsport.co.uk/ |
#3
|
||||
|
||||
Quote:
Yeah thanks for that its begining to make sense now, its a bit of a nightmare when your starting all over again with new equipment! So now I understand that the balance board is actually just an adaptor for your different battery styles to hook up, the next problem seems to be sourcing an actual tamco balance board which I'm struggling to find. any ideas?
__________________
Kyosho Lazer ZX Academy STR-4 PRO Team Associated B44.1 Factory Team |
#4
|
||||
|
||||
Things are looking up, contacted Tamco and it turns out the first batch of chargers were short packed and missing the balance board. Can't argue with customer service as I had a reply within minutes informing me of this and requesting an address to get the missing components out to me!
__________________
Kyosho Lazer ZX Academy STR-4 PRO Team Associated B44.1 Factory Team |
#5
|
||||
|
||||
With my charger I skipped the balance board as I only charge 2 cells
I kept the 3 wires to the left and soldered on my own stuff You will have to check what 3 wires you need but on most chargers I hvae done this for at the club it is the 3 on the right or 2 on the right and the last one usually red |
|
|