bx grip roll

[gratton-smith]

Hi could some one let me know how to stop my bx grip rolling, runing on carpet with schumacher mini pins, just about any corner it rolls, also is it best to run the one way center diff locked or loose,
cheers james

[Jonathan]

Having suffered the same, I would advise the following.

First off, lessen the grip, try yellow mini spikes and cut outer rows if necessary.

Get the whole car low, and the rear lower. Drive shafts shoud be at least level, use the bottom outer holes on the rear wishbones.

Fit the hard kit black springs (if you arent already).

If your running lipos, add some weight.

Slow down more on corners.

Good luck !

[Steve Collins]

Hi ive been having the same problem so ive just put a lrger rear tower from my old cat 3000 & put the rear tower to the front ,its worked brilliantly.now the whole centre of gravity has been brought down & the
car is sitting much lower.

Good luck,

[Bastos]

Sway bars ?
Just the rear sway bar change the car...