View Full Version : batley indoor set up
paulc
07-11-2006, 08:32 PM
hi all
anybody got a set up for batley indoor or a good starting point please
cheers paul
wacattack
07-11-2006, 09:39 PM
this is what i normally run at batley
rear:
30w oil with number 1 pistons and silver springs
middle hole on shock tower and inner on wishbone
camber link = middle hole on hub and inside on tower
medium wheelbase
2 degree antisquat
front:
40w oil with number 2 pistons and blue springs
middle hole on shock tower and inner on wishbone. if its too aggressive and biting in too much then move shocks to outer on wishbone
camber link = inner on shock tower with no washers underneath and inner on caster block
both washers on caster block at bottom position
30 degree caster blocks
tyres = yellow minipins
hope this helps!
Craig
paulc
08-11-2006, 09:29 PM
thanks i'll give that ago and see how it goes at batley regional on sunday
thanks again paul
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.