|
#1
|
|||
|
|||
batley indoor set up
hi all
anybody got a set up for batley indoor or a good starting point please cheers paul |
#2
|
||||
|
||||
this is what i normally run at batley
rear: 30w oil with number 1 pistons and silver springs middle hole on shock tower and inner on wishbone camber link = middle hole on hub and inside on tower medium wheelbase 2 degree antisquat front: 40w oil with number 2 pistons and blue springs middle hole on shock tower and inner on wishbone. if its too aggressive and biting in too much then move shocks to outer on wishbone camber link = inner on shock tower with no washers underneath and inner on caster block both washers on caster block at bottom position 30 degree caster blocks tyres = yellow minipins hope this helps! Craig |
#3
|
|||
|
|||
thanks i'll give that ago and see how it goes at batley regional on sunday
thanks again paul |
|
|