|
#1
|
|||
|
|||
Help~about pinion on BX
I've just got a stock BX. And i'm going to use a new Orion Revolution RyanSpecial Edition.
Which pinion should i use when i'm using the 10*1 motor?And what about the 12*1 one? Thanks a lot. Jason_Jo,China |
#2
|
||||
|
||||
Hi Jason,
i would take a 16t pinion for the 10x1 motor. try a 18t pinion for the 12x1 motor. but it's hard to tell since the internal gear-ratio isent mentioned in the instruction-manual. greets from switzerland Marco
__________________
2x xxx-BK, xx4-we, 2x MR4-BX, TC3 Last edited by Marco; 03-09-2006 at 08:53 AM. |
#3
|
|||
|
|||
Quote:
I have counted the internal gear-ratio that is 33/16=2.0675 I'm really afraid of over heat for i used to have lots of this problem when i was using the XXX4G+ It's not easy for me to buy any pinion smaller than 18T. Maybe i'll try the 17T for 12X1 first. Thanks a lot~ 谢谢(Thank u in chinese) Jason |
#4
|
|||
|
|||
i would run a 18t on a 10*1. maybe a 19t or a 20t on a 12. remember though under gearing can be as bad as overgearing.
ryan
__________________
Schumacher |
#5
|
|||
|
|||
Quote:
i still have problem about that. the instruction book said the final ratio = 84/pinion*2.2 so it's 10.87 when i am using a 17T pinion. and the recommend ratio for V2 Ryan Special on teamorion.com is 10*1 11.52 4wd 12*1 10.02 2wd so is that safe for me to use the stock pinion on a 12*1? or maybe i should choose a 10*1? My friends around me have no idea too. They are all afraid of over heat. Thx. Jason |
#6
|
|||
|
|||
thats what i use and also been ok.
ryan
__________________
Schumacher |
#7
|
||||
|
||||
hi Jason,
can you tell me where in the instruction bookle you did find that formula:final ratio = 84/pinion*2.2 ? i couldent find it
__________________
2x xxx-BK, xx4-we, 2x MR4-BX, TC3 |
#8
|
|||
|
|||
Quote:
on setting sheet, drive section. |
#9
|
|||
|
|||
Quote:
I'll try the 17T pinion for 10X1 first~ Jason |
#10
|
||||
|
||||
setting-sheet got it:flower: :flower: :flower: . btw i run a 14t pinion on a
10X2 fantom alloy2.
__________________
2x xxx-BK, xx4-we, 2x MR4-BX, TC3 |
|
|