|
#1
|
||||
|
||||
CORE-RC UDC20 WHAT LEAD ?
At present i'm using the UDC20 charger from Core-rc does anybody know what lead i need to charge orion,trakpower or lrp Lipo's ?
Part/no would be great
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
#2
|
||||
|
||||
Charge = ones in the box, balance = phone trakpower and they will tell you what lead you need.
__________________
Nortech is ACE! |
#3
|
||||
|
||||
Just cut one of the leads you aren't using and wire up the bullet connectors, or wire up a "Bullet" to "Deans" from the battery and use that
|
#4
|
|||
|
|||
this what your after......
Or even better go here: http://www.racing-cars.com/products.asp?recnumber=22576
New part just become available, so should make life sooo much easier for you, and will soon be in model shops
__________________
Schumacher Racing, Core RC, Speed Passion, Sorex, EDS, KO Propo, Nosram, Arrowmax, Thunder Power, Contact RC, Hobbywing, MIP, MR33, Intellect |
#5
|
|||
|
|||
Are the output connectors to the battery side of these chargers 4mm bullet sockets? They sell a nice cable set which would be handy with my bantam b6 if same plugs.
Also is this just a rebranded imax b6 as the form factor + menus + specs look really similar... |
#6
|
||||
|
||||
Cheers boys, mark you have a PM
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
#7
|
|||
|
|||
Got that Stegger, you have one back
Yes they are 4mm gold connectors on both ends of this lead, and one end has a Jst plug to go into your charger, like the Core, then the other end goes to a 2mm gold connector for balancing your lipo ie Speed Passion, Orion, Trak power etc. Hope this helps.
__________________
Schumacher Racing, Core RC, Speed Passion, Sorex, EDS, KO Propo, Nosram, Arrowmax, Thunder Power, Contact RC, Hobbywing, MIP, MR33, Intellect |
#8
|
|||
|
|||
Quote:
|
#9
|
|||
|
|||
New Core Balance lead - CR056
The lead you need is from Schumacher PtNo CR056
Core Balance Charger Lead - JST to Trakpower etc It has 4mm plugs both ends with a JST Balance connector for the charger on one end and a 2mm "spike" plug on the other for the battery. |
|
|