Brushless CRT + Associated TC4 + Rustler VXL !Open to offers!

[electric]

First up is my TC4 touring car. Good used condition with lots of spares pictured and a full box of wheels and tyres. it comes with a towerpro mg995 on the steering and 3 bodyshells one of which needs fitting properly.
All pictures can be found here-http://s136.photobucket.com/albums/q183/cashmerebear/TC4/

So needed to complete is a motor, esc, battery and Transmiter/receiver
£80 including everything

Next is my CRT Full pro - Full brushless conversion by RC product designs. It comes with 4 shells, plenty of spares including shocks driveshafts a chassis... e.t.c It comes with front and rear Innovative IRC shock towers and 2 black IRC alloy diff cups all BNIP
Pictures can be found here - http://s136.photobucket.com/albums/q...hmerebear/CRT/

£180 for the roller with the IRC parts
£280 for everything minus the servo and receiver
£350 including the Ace ds1015 servo and spektrum receiver

I also have a rustler VXL up for sale
it comes with a brand new chassis, front bulkhead and upper chassis (still in packaging not fitted as i haven't had time to fit them yet)
the original chassis, bulkhead and upper chassis cracked because the bulkhead 1st broke i didn't realise and that put alot of strain on the rest...
it has RPM - front and rear shock towers, front and rear arms, front hubs and front castor blocks as well as a bumper.
it has a bent integy wheelie bar that could be bent back and integy rear hubs
it comes with the worn and cracked stock rear wheels on stock tyres
the anaconda and alias black wheels front and back in good condition + a spare nip wheel
the transmission is fine but could perhaps do with a bit more grease as it does let a bit too much power go
the stock front shocks are fine but just need topping up with oil but the rears are a little bent
i have a set of 1/8th buggy shocks on the rear at the moment and they are super strong so i have just left them on there.
there are 4 buggy shocks, the shorter ones are on the back of the rustler and the longer ones aren't being used
there are quite a few sets of springs for the buggy shocks too (i think 2-3 full sets including the ones on the shocks)
i was using 1/10 buggy shocks on the front (the rear buggy shocks on the front of the rustler if that makes sense)
there are a full set and again there are more than 1 set of springs. if you want to do speed runs you can fit these shocks as it lowers the car alot and keeps it more stable
the bodyshell is a beaten up but with spacers e.t.c you can get it to sit tight...
Pictures can be found here - http://s136.photobucket.com/albums/q...hmerebear/VXL/

£110 for everything

All prices do not include postage and packing and i would like the money as a gift through paypal/ cash / cheque

My feedback on ebay can be found under Terzo53

Thanks richard