|
#1
|
||||
|
||||
![]()
Hi, I need some help with charging this battery I recently bought second hand. (it was in the box of a second hand RTR B4.1) Go easy on the lingo, I'm easily confused!!
Here's a photo, I think it's one of those cheap Hong Kong specials!.... [IMG] ![]() Loong Max (or Mai?) Tipple 20C 4000mAH I'm a bit confused with the cell rating which isn't clearly stated. I can't see a cell count number (ie 2s or 3s for 2 cell or 3 cell), but can I safely assume it's a 2 cell and 7.4 volts Why does it say 20c, but also 5C in the fiery logo circle? Is this saying I can charge it at 5c? The balancing connector only has 3 connections, and only fits into my chargers 2s port, so I guess this is another big clue. (The balancing connector must have more connections if it were a 3s battery?) I am using a new Fusion Ethos LX41B Pro charger. For a basic slow charge what would be my best settings? And for a race night with 5 minute races, wanting a faster charge, what can I push those settings to? Many thanks in advance. I'd rather not use my assumptions and get it wrong! |
#2
|
||||
|
||||
![]()
Hi
Yes it is two cell (7.4v) 20c is the disharge rate,5c is the maximum charge rate which means 5times the capacity which is 4000mah x5=20 amps If you charge at this im not sure how long it would last i personally only charge @2c which would be 8 amps but if youve only got one,and you pushed for time you might have to charge higher HTH ![]()
__________________
~Rick Evans~ ~LRP~shark st ft~lwb~ ~Carisma GT14B pro~ ~Schumacher KF2~ ~Schumacher Atom~ ~BSR Basher-RallyX~ ~Ascociated RC8.2e RallyX~ ~TeamC T8EV3 RallyX~ phat bodies worm-racing http://www.mendiprcraceway.co.uk |
#3
|
||||
|
||||
![]()
first of all yeh it looks like a 7.4volt or 2 cell lipo , 5 c is max charge rate, brca and everyone else recomends 1c charge rate,20c is discharge or punch from cell,but and its a big one most clubs like you to use hard case lipos so check first with your local club/clubs before using it there.safe charging rate is 4amps
__________________
Mattys the driver,my names carl
|
#4
|
||||
|
||||
![]()
Great, Thanks guys...
I did think it looked like a bit of a cheapy Hong Kong special, all big numbers but no knickers! My Fusion Ethos LX14B Pro Charger only goes up to 4 amps, not the 8 you recommend. So that will give me a slower, safer charge? I'll also talk to my local club and see if I'm legal! |
#5
|
||||
|
||||
![]() Quote:
It was 1c max ......
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#6
|
||||
|
||||
![]()
oops well spotted mark 1 c
__________________
Mattys the driver,my names carl
|
#7
|
||||
|
||||
![]()
Hi,
Just discharge at a maximum of 80 Amps ( 4000ma = 4 Amp x 20 ). Charge at about 4 Amps for longevity ( 4000ma = 4 Amp's ). Don't worry about it being made in China, as practically everything is nowadays, even the Girl I slept with last year. Lol. This junk is made in China, and it's proving OK; ![]() |
#8
|
||||
|
||||
![]()
actually very good cells, i have several packs, using these cells in my electrtic 1/8 and they are working just fine, and also my 1/18 and flying toys too. only downside as pointed out earlier is they are soft cased, fine for bashing etc but brca clubs may not let you run them.
|
![]() |
|
|