|
#1
|
||||
|
||||
Code rc / etronix pulse. Binding help please
Hi people
Anyone help me i cant seem to get my radio gear to bind, and i cant find a copy of instructions, does anyone no how to do it please?? thanks guys mike
__________________
If you aint tradin paint, You aint racing |
#2
|
||||
|
||||
yep, the instructions tell you to turn on the transmitter....
then press and hold the bind button, and then power on the receiver... do not let go until you have got a green constaint light, then the bind is successful... However i have not had such luck, as i think i have a duff Rx it says if not successful, try again, making sure you are at least 1m clear of any items that may interfere,..... i ended up down the bottom of my garden, still with issues anyway hope that helps.... Cheers |
#3
|
|||
|
|||
i would try holding the bind button as u turn both on as alot of other hand sets do it this way
|
#4
|
||||
|
||||
ok, so the instructions say "Turn on the transmitter, then connect the power of the receiver keeping the receiver "bind" button till the light turn on GREEN which means the binding is successful."
however thank you for suggesting trying both powering on at the same time whilst holding the bind button... It worked, so the receiver is good, the instructions are broken Interestingly I could bind one receiver by following the instructions, however the second one needed to be powered on at the same time in order to get it to bind.... |
|
|