|
#1
|
||||
|
||||
bonhead questions xx4 we rebuild
Just when i think all hte hard work is done i have 2 problems
- why am i running huge toe out even though i adjusted front camber link and tie rods as per manual - have i got the rear arms the wrong way around because the shock springs rub the inside of the wheels!
__________________
RC10 B3 Team / Losi XX4 WE (in progress!) Nosram Matrix Evo / Nosram Matrix Reverse LRP Vector X11 10.5t / Nosram Storm 4.5t KO Propo 2343 / KO Propo 2173 Sanwa RX 311 Sanwa Super Exzes Trakpower & Bionic Bantam BC6 |
#2
|
||||
|
||||
On the front the turnbuckles you have are for the wide ackerman link, you need longer turnbuckles to rectify this or move the bellcranks to the wide position.
The wishbones should be left on right and right on left, make sure you don't use rear hubs with toe-in on as your wishbone hangers have 3 deg on them.
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
|
|