|
#2
|
|||
|
|||
as in the ones that hold the cvd together?
Normally once the grub screw undone they fall out, if someone has used some mega threadlock a few mins on a hot plate should do the trick |
#4
|
|||
|
|||
omg shouldnt be that tight mate, normally just push out with a small allen driver maybe someone has used glue before
|
#5
|
|||
|
|||
They can be really tight. I use an old 1/16 driver to knock them out and then pull them with pliars. Just be careful you dont slip while doing it. I am sure there is a proper way involving a punch, hammer, anvil and huge bearded blacksmith.
N |
|
|