|
#1
|
||||
|
||||
Steering Help
Hi all,
Anyone had their steering stuck on full lock? It was perfect when I finished with it last night? Any thoughts as to what the problem could be? The car is a one day old B4.1 RTR. Cheers |
#2
|
||||
|
||||
Check the instructions and mount the servo horn at exactly the angle as shown in the picture, otherwise the servo horn will lock as yours did.
|
#3
|
||||
|
||||
Thanks Sparrow. Even though it was running well yesterday and it's RTR?
Cheers |
#4
|
||||
|
||||
I had a b4.1 RTR servo fail on me by locking itself it the end points. It would do full lock but then stay there! Did a warranty return to CML and got it replaced. To be honest wen to an Align servo and more than happy with it.
|
#5
|
||||
|
||||
Even if I power it up with the wheels turning left, it calibrates then locks to the right.
|
#6
|
||||
|
||||
Turns out there is a an issue with the connection between the receiver and servo (thanks Gainsy). The car can sit there on full lock right - touch the wires and then it's fine and resets to neutral. Back to DMS on Monday :-(
|
#7
|
||||
|
||||
It can be annoying when things go wrong, but i'm sure darren and the crewe at DMS will sort you out. It's good to here that you've bought from a local shop and this is were you will get the backup that you won't get from buying from an internet trader.
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
|
|