|
#1
|
||||
|
||||
confused charging lipo
Dear Guy's, I have some problem with one lipopack 5000-40c.
When I try to charge balanced, 5amp drops to 0.7amp after a some seconds. So lipo when full, and I try the store function after a some seconds I get the beep its done?? Checking with a voltmeter is says 8.55volts. Now I confused, is this pack dead, full or stored?? Thanks for your advice,..........Appie. |
#2
|
||||
|
||||
That is more than full... Stop charging and use the battery! 8.4v is fully charged..
|
#3
|
||||
|
||||
does your charge discharge too?
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#4
|
|||
|
|||
Good point - if it doesn't, it won't be able to 'storage charge' |
#5
|
||||
|
||||
Now discharging to minimum 6.6v! After this Will charge and zee shag this does!
|
#6
|
||||
|
||||
Keep an eye on it (and keep it in a lipo sack if you have one)
An overcharged lipo is more likely to pop than a correctly charged one. Also have a look at the settings on your charger and change them if that's possible.
__________________
|
#7
|
||||
|
||||
Thanks for your support. My esc. does not have a lipocutoff, so I never new the shape my lipos are in. So ordered a buzzer, and now know when they are into minimum volts.
|
#8
|
|||
|
|||
Just balance charged my 4000ma saddle lipos and they took 5000ma,
Tell me how that works? Ross |
|
|