|
#1
|
|||
|
|||
servo on aux switch
wondered if you could run a servo on an aux switch, ive got a DX3S and want to make a lorry with opening doors. so i want to know if its possible to make it so the servo opens the door and it is linked to the auxiliary switch, so you flick the switch on the remote (DX3S) and the doors open, flick it back and they will close, dont know how ive explained the idea but any feedback will be appreciated, and mainly, anyone know if this will work and how
__________________
If you can't fix it with a hammer..... You've got an electrical problem! |
#2
|
||||
|
||||
yep should be no problem thats just the sort of thing its designed for
just remember to set end points of servo travel so its not straining when doors are fully open or closed regards fid |
#3
|
|||
|
|||
|
#4
|
|||
|
|||
thanks, that thread is wear i got the idea from, anyone know how to set it up though because i dont have a clue
__________________
If you can't fix it with a hammer..... You've got an electrical problem! |
#5
|
||||
|
||||
i suspect the aux channel is preset to switch or dial you will need to set end points as per steering servo
you may need to switch function on in the menu somewhere fid |
|
|