|
#1
|
|||
|
|||
Dex 210 servo help wanted !!
I just got durango 210 and brought savox servo 1251 digit coreless sevo what the best servo horn to use with it as I'm new to this I'm not sure what to buy so would like some advice thanks
|
#2
|
||||
|
||||
Their is a 25T servo horn in the box. I have tried other horns and they seem too long.
__________________
Aidan Burke - Southport Radio Car Club #SchumacherFamily #TQmodels #ExtraLapRCpodcast |
#3
|
|||
|
|||
MB models
Kimbrough KP114 Servo-Saver Futaba 25 Spline |
#4
|
|||
|
|||
Actually the tlr22 alu servo horn is a really good fit, only need to epand the hole for the bolt holding the ball slightly.
I would not reccomend using the 1251 without a servo saver in the 210 though, manged to mess up two in ours within four packs of running without major shunts. |
#5
|
|||
|
|||
And Savox is not running with Tekin, because of the high current demand......
|
#6
|
|||
|
|||
Thanks for the advice guys will I need to buy space-saver & servo horn for my 1251 savox as going to order my bits tonight thanks again
|
#7
|
||||
|
||||
Have you bought a kit or an RTR. if its a kit you will have a 25T horn with it. If you give me a shout and I will post you a plastic one I have a few lol
__________________
Team C TM2 Team Durango DEX410Rv3 Shells by Number5designs My Local clubs Mansfield & RHR |
#8
|
||||
|
||||
Hi you will find in the Team Durango 210 Kit that it is supplied with servo horns ranging from 23-25T with Savox being 25T
I have been running a Savox 1258 which is not a low profile servo but have only damaged one servo horn in 2 years of running my 210 car. I would presume it depends how hard you hit things tho.. The new RTR kit comes with a servo saver so it might be worth ordering one of those if you feel the need.
__________________
|
#9
|
|||
|
|||
I have the kit durango 210 brought it used so no spares
|
#10
|
||||
|
||||
Hi Mate
The steering servo and horn set is Part number TD320124 and costs around £6.49
__________________
|
#11
|
||||
|
||||
I run a standard servo horn with no servo saver with a savox 1251
And the speedo is a tekin rs pro and its worked like that for a year before that it was the same combination in a tc02c |
#12
|
|||
|
|||
I've been running Savox 1258's with Tekin RS Pro's in both 2WD and 4WD for almost four years now without a single problem. This is the first I've heard of anyone saying there is a problem with high current draw.
__________________
Tony Mulligan DESC410R, DEX410, DEX210, Cream Extreme (the dog's b******s) www.srcc.co.uk |
#13
|
|||
|
|||
Just got one of these, on this recommendation, and it fits real good.
__________________
Team C TM2 / Tamiya M03 / Mardave V12 |
#14
|
|||
|
|||
Quote:
Here in Germany a lot of people have this problem, i don't know why, but something in the construction from Savox must be very cheap But everyone makes his own experience..... For me Savox is dead - as always in life: If you buy cheap, you buy twice...... |
#15
|
||||
|
||||
Some receivers can experience 'Brownouts' when running a savox servos, a simple fix is to plug a capacitor into the receiver. One like this http://www.spektrumrc.com/Products/D...ProdID=SPM1600
__________________
Team Durango Australia www.team-durango.com Proline Australia A list of option parts and other information for Durango vehicles. www.durangofansite.com |
#16
|
|||
|
|||
Quote:
|
#17
|
|||
|
|||
Hi I just used savox servo 1251 in my durango 210 with a 25t horn and had no problem at all in the 'b' final fist time ever plus wining 2 races and 2 second places so happy days!!!
|
#18
|
|||
|
|||
Quote:
Same goes for brushless motors also. You can`t feed a 5.5t motor with a 35amp esc in a buggy. I use Savox servos in four buggys now with Futaba receivers and Hobbywing esc`s. Never had a single problem. If you have to buy £80 servo`s because your receivers and esc`s can`t deliver enough amps its not the servo that is the problem. |
#19
|
|||
|
|||
I think different, one component has a problem, no other component has this problem, so i think construction from savox is more or less bull-shit
|
#20
|
|||
|
|||
If it is good enough for drivers winning 1/8 buggy worlds an 1/10 buggy pre-worlds its good enough for me
|
|
|