C4.2 setup help

[washy13]

Hi
I need help with c4.2 setup for cork tracks like chad and worksop .

[lloyd1]

I ran green springs all round with 1.7 2hole pistions ans 30 oil in back and 35 in front. Shocks inside on front shock tower and bottom on wish bone. Rear tower middle and inside on wishbone. 1 anisquat, rear link on tower 1 up from kit set up and middle on hub. Front 2mm wash under ball stud and in side on the front hub hole, 30 degree hubs, -1 camber all 4 wheels and b44.1 lower wing mod , and i took all brass out of front , hope helps

[gazhillAE]

Petite site
Cragg Worksop
C4.1
Chassis was identical

[washy13]

[QUOTE=lloyd1;816536]I ran green springs all round with 1.7 2hole pistions ans 30 oil in back and 35 in front. Shocks inside on front shock tower and bottom on wish bone. Rear tower middle and inside on wishbone. 1 anisquat, rear link on tower 1 up from kit set up and middle on hub. Front 2mm wash under ball stud and in side on the front hub hole, 30 degree hubs, -1 camber all 4 wheels and b44.1 lower wing mod , and i took all brass out of front , hope


Did u run kit wheelbase

[lloyd1]

yh i did

[RDG 40]

Has anyone seen anymore c4.2 set ups recently from top lads? B nice to get a few out before they all swap to b5m

Seems to have gone quiete on cml site etc

[K-Brewer]

Originally Posted by RDG 40

Has anyone seen anymore c4.2 set ups recently from top lads? B nice to get a few out before they all swap to b5m

Seems to have gone quiete on cml site etc

ive followed ben jemisons set up for worksop
http://www.petitrc.com/setup/associa...rksop20131123/
great starting set up