|
||
|
 |
|
||||||||||||||||||
|
#1
06-03-2014
|
||||
|
||||
DEX210 Forward Cab Standard Body fits +8mm Chassis
Last year I bought some of the standard forward cab body shells as they were very cheap at the time.
I've got a RTR DEX210 with the +8mm chassis and I've finally killed the original RTR shell, I trimmed up one of the standard shells thinking maybe it would fit with a bit of adjustment but from what I can see the only difference is it is very very slightly tighter on the chassis and the holes are understandably a few mm's out. The contours along the chassis are pretty good. Am I missing something? A bit of tape on the inside will prevent chassis rubbing. Just thought I'd share this given these can still be bought for less than half the price of the +8mm ones on ebay. 
|
|
#2
03-04-2014
|
||||
|
||||
|
They fit the -8 mm u have to order the one for +8 mm kit
Brad
__________________
Bear r s losi mini 8 Mardave 1300 stox Mardave banger swb mardave bangor lwb Mardave ac 12 Mardave. F1 stockcar Mardave assassin Its just toy car fun if in Doubt keep it pinned and get off the wall
|
|
#3
04-04-2014
|
||||
|
||||
|
Just some thing i noticed.
I ordered a cab forward standard length body. It does not fit the site pods, because the body has the shape of de rtr/V2 pods. So the +8 cab forward body should fit the rtr and V2.
|
 |
|
|
Team Durango
Linear Mode
