|
#81
|
||||
|
||||
Very nice completed car!
A lot can be said for a neat wiring job!. Makes the chassis look like a purposeful race machine! Do you cut and re-solder your servo wires?
__________________
Regards, David Secretary/Treasurer Southern Highlands Off Road R/C Car Club Inc. (NSW Australia) http://shorrcccinfo.wix.com/shorrccc www.facebook.com/SHORRCCC |
#82
|
||||
|
||||
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#83
|
||||
|
||||
Quote:
Yes I do re-solder all of my servo leads
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#84
|
||||
|
||||
OK... here is the breakdown of part #'s for the Light weight gear box and Avid/ Schelle slipper mod.
Tamiya lightweight idler shaft 54344 x2 AVID Alloy RB6 top shaft AV1020-TOP-KYO ( needs to be modified 2,5mm on shaft side and 2mm gear side ) MIP 17.5 Puck System B4.2 13140 ( You will need to use B4 diffgears ) MIP CVD Rear Axle RB6 12142 x2 MIP CVD 12mm Keyed Hex Adapter RB6 12144 x2 or AVID Kyosho HD Long Rear Axle AV1041-CONV ( slight modification needed..easy to do ) or MIP CVD Rear axle TLR 22 2.0 14119 AVID TRIAD or Schelle NOVA slipper of your choice and they both fit under the OEM gear cover
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO Last edited by SiR_Dave; 01-06-2014 at 05:50 PM. Reason: More info for Axles |
#85
|
||||
|
||||
rear toe-in is 3.5 degrees?
|
#86
|
||||
|
||||
Standard toe on the xmw is 3*
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#87
|
||||
|
||||
Sure?
Because normally the XA block is 3.5 degrees. |
#88
|
||||
|
||||
Yep... 100.2% positive Measured it out on my set up station... 3.0* each side also the new XA block is very different than the normal XA block.. I'll post up a picture later for you
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#89
|
||||
|
||||
Thats what I thought. The XA is 3.5 and the XB is 4.0........ mmmm.
Mine should be here in 5 days and counting..........
__________________
http://www.oople.com/forums/showthread.php?t=83767 TRADER FEEDBACK **** 5 Metres Speed Swimming Champion 1976**** |
#90
|
||||
|
||||
The current XB and XA blocks will not fit the XMW... also the XA block that comes with the XMW is .5mm shorter than the old XA block.. so it works out pretty much what I measured on my set up station..
This is a good read as well.. http://www.petitrc.com/setup/tamiya/...01X_AntiSquat/
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#91
|
||||
|
||||
Ready for testing tomorrow night
|
#92
|
|||
|
|||
Anybody have a good starting setup for high grip carpet - I'm more used to touring cars on tarmac so i'm struggling a bit
Thanks
__________________
1066 RACING EECC Eastbourne Electric Car Club |
#93
|
||||
|
||||
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#94
|
||||
|
||||
Quote:
32.5 Oil in the rear with a 1.7 piston Blue 2/4wd rear spring, 1mm limiter. 20mm front ride height 20mm rear ride height Kit setting on the rear hub and shock tower One shock hole in on the front tower from the kit setting and .5mm shim under the shock tower ball stud. Gear diff with 2000w oil This should be a pretty good starting point
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#95
|
|||
|
|||
Quote:
What about the basic settings such as toe & camber? Note i'm running a xm converted 201 rather than the xmw but I guess the 2 cars are similar enough that your setup will be a good starting point for the old car too?
__________________
1066 RACING EECC Eastbourne Electric Car Club |
#96
|
||||
|
||||
Quote:
I changed after this race the rear damper piston to 1.6 with 350 oil to reduce pack. |
#97
|
|||
|
|||
Quote:
Thanks for your reply, coincidentally I looked on Petit RC this morning just after my last post and printed your setup sheet out wondering to myself why I hadn't looked on there earlier. Thanks for the update on the rear shock settings
__________________
1066 RACING EECC Eastbourne Electric Car Club |
#98
|
||||
|
||||
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#99
|
||||
|
||||
Scanned a copy of the new setting sheet... maybe Arn0 can get a editable PDF file done up for us soon... since I have sent it to him to work his magic on it
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
#100
|
||||
|
||||
__________________
TRF 501x / 502xs / 511 / 503/ 201xr/ 201xmw/ 211xm AE C4.5 Centro / AE CT4.5 Centro / T5M SDRC / SMC / Shop UFO |
|
|