|
#1
|
||||
|
||||
YZ-4 and YZ-2 common parts list
Based on parts number starting with z2(mibosport) it looks like these cars have a whole lot of parts in common, besides the small bits and bobs. I was rater surprised to find out they also share the rear suspension mount, rear Upper Arm Mount and steering bell crank. In stead of buying all those alu option parts, one is better of with a 'cheap' second hand YZ-2 :-)
Front & Rear bumper # Z2-001BIn Wing mount/Body mount # Z2-001WIn Rear suspension arm # Z2-008RIn stock Rear universal shaft (60.5mm bone) # Z2-010RIn stock Rear universal bone (60.5mm) # Z2-010RBIn stock 6mm Rear wheel hub # Z2-011R6In stock 4.5mm Wheel spacer (2pcs) # Z2-011SIn stock Bulk head mount/G box support/R upper arm mount/Shock tower spacer # Z2-018MIn stock Aluminum steering bell crank # Z2-201BAIn stock Rear suspension mount (Front side) # Z2-300RFIn stock Rear suspension mount spacer (F/R) # Z2-300RSIn stock Aluminum Rear Upper Arm Mount # Z2-300RUWIn stock Rear Upper Mount 6g weight YZ-2 # Z2-300RWIn stock Rear Steel suspension mount (Front side) # Z2-300SRFIn stock Gear box rubber sheet # Z2-302RIn stock Aluminum idler shaft # Z2-303IIn stock Rear hub carrier (0 degree) # Z2-415RIn stock Aluminum Rear Hub Carrier (0°) # Z2-415R00In stock Maintenance kit for gear differential # Z2-500GMIn stock Metal gear differential unit (Assembled) # Z2-500MGSIn stock Gear differential case (with screws) # Z2-503GHIn stock Idler gear # Z2-503IIn stock Ventilated dual slipper set # Z2-670VIn stock Ventilated slipper plate (Dual pad type) # Z2-670VOPIn stock Ventilated slipper plate # Z2-670VPIn stock Rear X33 shock set # Z2-S1LIn stock Front X33 shock set # Z2-S1SIn stock Rear X33 shock shaft # Z2-S2LIn stock Rear X33 shock shaft (Black Diamond Coating) # Z2-S2LDIn stock Front X33 shock shaft # Z2-S2SIn stock Front X33 shock shaft (Black Diamond Coating) # Z2-S2SDIn stock X33 shock O-ring cap (with O-ring) # Z2-S3In stock X33 shock X ring # Z2-S3XIn stock X33 shock adjust nut # Z2-S4AJIn stock X33 shock collar # Z2-S4CIn stock X33 shock inner spacer (10pcs) # Z2-S4IIn stock Rear X33 shock body (with O-ring) # Z2-S4LIn stock Front X33 shock body (with O-ring) # Z2-S4SIn stock X33 shock plastic parts YZ-2 # Z2-S9
__________________
==> check out our youtube channel http://www.youtube.com/rcstefracing ==> FB https://www.facebook.com/RCstefracing/ Last edited by rcpower; 12-11-2015 at 10:12 PM. |
#2
|
||||
|
||||
It also shares parts with the B-Max2 and B-Max4. I have the list (from the manual) but not allowed to share. Wait for the manual.
__________________
Numquam cedunt victores, numquam ignavi vincunt. Last edited by skyaflake; 13-11-2015 at 01:18 PM. |
#3
|
||||
|
||||
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#4
|
||||
|
||||
I am trying to work out what hop ups to source and struggling with the rear... Is the yz-2 arm standard? Or the s4 arm? If the yz-2 arm and upper rear mount are the same surely so is the rear hangar?
But nowhere is showing that?
__________________
Dave "Amish FJ" Gibson RB Products ~ Yokomo Nuclear RC ~ Xpert ~ Hacker |
#5
|
|||
|
|||
Yokomo Europe lists the YZ-2 rear arms as option parts:
http://www.teamyokomo.eu/yokomo/yz-4/ |
|
|