|
#1
|
|||
|
|||
Dex410 diff hoop/gearbox holder
Hi,
I try to find a good quality pic with TD aluminum gearbox holder installed, but nothing Could please someone take a good frame with the setup? I bought an Exotek rear hoop but it does not fit so well, maybe the original solve the problem. Thanks Radu |
#2
|
||||
|
||||
Hi,
I do only have the TD rear diff loop, on my 410v3, i can give you a pic from it at the evening.
__________________
Greetings from Austria! My cars: CatK2/CougarSVR/BossCat/Dex410v3/Dex410v5/Dex210/Dex210F/Yokomo yz-10‘94/Yokomo yz-10‘95/ |
#3
|
||||
|
||||
Have a look here:
http://www.oople.com/forums/showthread.php?t=90385 There's a picture of one installed in my DEX410v3.
__________________
5 Time Oople Invernational SC Champion. Powered by OptiPower Do, or do not, there is no try! |
#4
|
|||
|
|||
Thank you, that is great. I have a problem with the Exotek one, I bought it as a pair with front one, and that consists by having a gap between the edge of the diff case.
I am using you pic to show where http://i.imgur.com/8pELjP7.jpg The gap is about 0.8mm...and do not like So the stock would solve the problem, I belive. Because the rear bulkhead (330009) is new...so the problem is from the hoop. |
#5
|
||||
|
||||
Quote:
__________________
Team Durango Australia www.team-durango.com Proline Australia A list of option parts and other information for Durango vehicles. www.durangofansite.com |
#6
|
|||
|
|||
Quote:
From what Ive checked, the exotek is a little lower, like the first for 23.5mm lipo with just one holes for battery holder pin. In the pictures from exotek, the front one has a gap and the rear fits perfect. |
|
|