|
#1
|
||||
|
||||
TM4 carpet setup??
Has anyone got a good TM4 setup for high grip carpet?
|
#2
|
||||
|
||||
I would look here:
https://onedrive.live.com/?authkey=%...E850FD02E350A7 or here if nothing of Craig's takes your fancy: https://onedrive.live.com/?authkey=%...E850FD02E350A7
__________________
Clive Check out the goings on at HBI here: https://www.facebook.com/pages/Heske...68872353145927 Last edited by Clive Loynes; 11-07-2016 at 06:52 AM. |
#3
|
||||
|
||||
Have a look here: http://site.petitrc.com/setup/teamc/...sTeamCTM4.html
|
#4
|
||||
|
||||
looked at all of these, no high grip carpet setup
|
#5
|
||||
|
||||
Check out Craig Collinson on Facebook he has uploaded a starting setup sheet for carpet.
|
#6
|
|||
|
|||
Shocks-
Front: 2x 1.6 pistons, 550 wt Rear: 3 x 1.4 pistons, 350 wt Other- Shocks to rear of tower Center diff 500k (a lot of people prefer slipper for high grip carpet, but I like the feel of the diff personally) 10k front diff/7k rear diff 1.6 front bar, stock rear bar middle dot for anti squat and toe in all around laid down front shocks middle (tower) and outer (arm) for rear upper camber link hole front tower lower camber link hole rear tower Tyres- mini pin rear (outer row cut) 4wd cut stagger front (slightly worn works great) This will be a close starting point for carpet, basically what I use and then adjust depending on the days traction level.
__________________
PR Racing UK Absima UK Last edited by fivepointnine; 12-07-2016 at 08:24 PM. |
|
|