|
#1
|
|||
|
|||
![]()
My XX has a my old speedo and reciever in it and they feel welded in
![]() Also will the old servo in it work with newer electrics 2.4ghz and brushless stuff? |
#2
|
|||
|
|||
![]()
My advice use a small flat head screwdriver
Gently separate from chassis Clean up chassis once removed
__________________
Schumacher CAT 2000 ec Fireblade EVO |
#3
|
|||
|
|||
![]()
Your servo should be fine as your esc should be supplying the right voltage to the receiver and then the receiver onto the servo, only thing is it may feel a bit slow compared to some of the newer stuff
|
#4
|
|||
|
|||
![]()
Old servos were analogue new gear is digital
|
#5
|
|||
|
|||
![]()
I've run my old analog servos on new digital receivers with no issues
|
#6
|
|||
|
|||
![]()
Some people have problems with glitches or false centering
|
#7
|
|||
|
|||
![]()
Will be leaving the old receiver in for now as don't have a decent 2.4 set yet. Will the speed work ok with and old receiver and servo
|
![]() |
|
|