WANTED 124 Tooth Belt

[James]

124 Tooth belt in conventional pitch to suit schumacher etc wanted.


Thanks!

[fidspeed]

James
nearest off the shelf seem s to be 125 teetth or 375mm try belting online. Is the any adjustment to take up the slack ?

Dave

[knighthawk]

Hi James,

Would this be for converting a K1 to Shortie Pack layout ?
If so I seem to remember reading somewhere about using a Tamiya Trf501/Durga Belt , these are 369mm and I believe 123t

[Mwarren]

If this is for a K1 shorty conversion then U2238 125t belt is what I used on mine

[James]

Originally Posted by knighthawk

Hi James,

Would this be for converting a K1 to Shortie Pack layout ?
If so I seem to remember reading somewhere about using a Tamiya Trf501/Durga Belt , these are 369mm and I believe 123t

Yes it is, and that's what is on, it's just that bit too tight

[knighthawk]

I’ve got the 125 fitted to my K1, I believe it was from the SST
It’s a little on the loose side, and the top and return of the belts nearly touch, I feel 125 is too long