|
#1
|
|||
|
|||
R10.1 braking performance
Hi
Just wondering what everyone thinks of the brakes on the R10.1? i'm running mine in a 2wd with a Orion ultimate 6.5T on carpet, and whilst it stops, from the feedback I have had on it, its not as strong as it could be. Just wondering what people's experience has been? Cheers Adrian |
#2
|
|||
|
|||
R10.1
Hi
I have an R10.1 and I can’t say I’ve noticed an issue with the brakes at all. Do you have a program box for it?! Also have you checked your brake settings on your TX!? No expert in this as I don’t do enough racing these day but just putting it out there 👍🏻 |
#3
|
|||
|
|||
Hi Jonro7 - don't worry the feedback is appreciated.
Yes got the programming box and recently re-calibrated the ESC. Thanks for the reply |
#4
|
|||
|
|||
I run a TLR 22 4.0 2WD buggy on carpet with a 10.1 and orion 6.5t motor. My rear wheels will physically lock on full brake when set at 100% via DSB-R program box. I run mine at 87.5% (12.5% steps), so 1 down off max and find the stopping performance adequate.
|
#5
|
|||
|
|||
I run it in a B6 and B64, no problems with brakes.
I think the 4wd is at 85% and that is more than enough. Don’t forget the slipper can effect your brakes on high grip tracks |
#6
|
|||
|
|||
I run mine in a PR SB401 and if I run brakes at 100% it will stand it on its nose.
|
#7
|
||||
|
||||
There are different versions of the program box. I believe that the more recent ones have more settings.
__________________
My feedback http://www.oople.com/forums/showthread.php?t=125429 |
#8
|
|||
|
|||
Not with this esc but a different brand I had a rather tired orca motor and the brakes were rubbish I bought a new motor with the same esc Settings the brakes were unbelievable so maybe worth trying another motor
|
|
|