Go Back   oOple.com Forums > Events & Venues > CLUB TALK > Mendip RC Raceway

Reply
 
Thread Tools Display Modes
  #1  
Old 03-03-2014
blue_pinky's Avatar
blue_pinky blue_pinky is offline
Mad Member
 
Join Date: Aug 2007
Location: Weston-super-Mare
Posts: 1,625
Default Next work party weekend coming up…15th & 16th March

Our first work party weekend was….very badly attended. Other than committee members, there was only 1 other person there to help. The few that did attend did very well with what they could, and some good progress has been made, but it has left us behind on where we need to be to get your club ready for it’s summer calendar AND for all of us to use in general.

A number of factors contributed to the low turnout. We could probably have promoted it more actively and with better notice, and maybe we shouldn’t have planned it for a weekend where so much racing was scheduled (BWOC & Torquay). We were grateful that some people were good enough to let us know they couldn’t make it, but mostly, the call for help went answered.

So…with this in mind, we REALLY NEED YOUR HELP on the next one. The club can only survive if we maintain and improve BOTH tracks and the infrastructure. Without all elements working properly, and the income from events on both tracks, we will not be able to run the club and racing you want.

The committee cannot do it alone, and really need the support of as many members (or anyone for that matter!) as possible. We are all volunteers in this, and without your help we cannot do the things you want us to with the club. The list of jobs we have is long, and will significantly improve the facility for ALL the racers!

Although there is real work to do, work party days can also be a lot of fun too. If your relatively new to us, they give you chance to hang out, meet and talk to other members, and be part of the club and it’s development. Clubs can’t exist without it’s members, so come along and be a part of it…we’ll even provide the tea, coffee and cakes, if a bit of bribery will help

Who's able to come and help?
__________________
AKA: Andy Nancollis
1/10th drives: Yokomo BMax2MR & BMax4
1/16th drive: Carisma GTB
Racing in South West: http://www.mendiprcraceway.co.uk/
Racing in Wales: www.caldicotrcracers.co.uk
Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk
Shells by Square Crabs
Reply With Quote
  #2  
Old 04-03-2014
DrPaul's Avatar
DrPaul DrPaul is offline
Senior Member
 
Join Date: Apr 2009
Location: Bristol
Posts: 567
Default

Just to clarify, we need help with basic stuff such as weeding, grass cutting, scraping off loose paint, rubbing down, a bit of elbow grease but nothing to technical!

Get onboard & help your club/track.
__________________
Paul Morrissey
Bristol Model Car Club
www.rcbearings.co.uk
Reply With Quote
  #3  
Old 04-03-2014
DrPaul's Avatar
DrPaul DrPaul is offline
Senior Member
 
Join Date: Apr 2009
Location: Bristol
Posts: 567
Default

Wire brushes, sandpaper, paint scaper, grass edger, strimmer, what can you bring?
__________________
Paul Morrissey
Bristol Model Car Club
www.rcbearings.co.uk
Reply With Quote
  #4  
Old 11-03-2014
blue_pinky's Avatar
blue_pinky blue_pinky is offline
Mad Member
 
Join Date: Aug 2007
Location: Weston-super-Mare
Posts: 1,625
Default

BIG BUMP on this

Extra info...

Mike from the cafe will be around on Saturday morning doing work in the cafe/kitchen too....and has offered to do everyone who turns up a free tea/coffee and roll!!!

So...who is able to come along?

So far we have...

Andy
Paul
Kev
Rick
Si O
Dan O (Sunday)
Rob Paynter (Sunday)
Tom Owen (Saturday)
Terry Leach + Grandson (Saturday)

which is a good start....but who else will be there...many hands will make very light work of the jobs that need doing!
__________________
AKA: Andy Nancollis
1/10th drives: Yokomo BMax2MR & BMax4
1/16th drive: Carisma GTB
Racing in South West: http://www.mendiprcraceway.co.uk/
Racing in Wales: www.caldicotrcracers.co.uk
Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk
Shells by Square Crabs
Reply With Quote
  #5  
Old 11-03-2014
Dr Fly Dr Fly is offline
Member
 
Join Date: Apr 2013
Location: South Wales
Posts: 239
Default

Count me in for Sat, although i come with no tools as i dont posses any. Please furnish me with sharp and dangerous things.

Tom
Reply With Quote
  #6  
Old 11-03-2014
blue_pinky's Avatar
blue_pinky blue_pinky is offline
Mad Member
 
Join Date: Aug 2007
Location: Weston-super-Mare
Posts: 1,625
Default

haha...sure we can arm you with something suitable!
__________________
AKA: Andy Nancollis
1/10th drives: Yokomo BMax2MR & BMax4
1/16th drive: Carisma GTB
Racing in South West: http://www.mendiprcraceway.co.uk/
Racing in Wales: www.caldicotrcracers.co.uk
Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk
Shells by Square Crabs
Reply With Quote
  #7  
Old 11-03-2014
DrPaul's Avatar
DrPaul DrPaul is offline
Senior Member
 
Join Date: Apr 2009
Location: Bristol
Posts: 567
Default

Im in.....come on guys its your club too and we do NEED your help!!
Some weeding, rubbing down, nothing to physical
__________________
Paul Morrissey
Bristol Model Car Club
www.rcbearings.co.uk
Reply With Quote
  #8  
Old 11-03-2014
Terry.l Terry.l is offline
Member
 
Join Date: Mar 2014
Location: Exeter
Posts: 3
Default

I'll be at the club on sat with my grandson to help ,terry leach
Reply With Quote
  #9  
Old 12-03-2014
blue_pinky's Avatar
blue_pinky blue_pinky is offline
Mad Member
 
Join Date: Aug 2007
Location: Weston-super-Mare
Posts: 1,625
Default

Quote:
Originally Posted by Terry.l View Post
I'll be at the club on sat with my grandson to help ,terry leach
__________________
AKA: Andy Nancollis
1/10th drives: Yokomo BMax2MR & BMax4
1/16th drive: Carisma GTB
Racing in South West: http://www.mendiprcraceway.co.uk/
Racing in Wales: www.caldicotrcracers.co.uk
Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk
Shells by Square Crabs
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com