B44 set up

[gnr racer]

Hi Guys, could a few of you running b44's at Caldicot give me a ball park set up....
Thanks

[axeman]

if you answer your phone I could tell you.. too much to type out

[gnr racer]

I would but im still trying to repair & dry out the gazebo you borrowed
...oh and trying to straighten out the pegs

[axeman]

I got you new gazebo!!!

[Big G]

I ran mine with with a 5.5 on 21/84 last month I think (WRCA 1st round) and it went well. Qualified 2nd in the A but went home before the final after we were told there was a 2hr wait for the nitro to run.

Front:
40wt/silver
inside bone/inside tower
2 washers under ball stud
AE blue hubs
-1 camber
-1 toe in

rear:
25wt/silver
inside bone/middle tower (xtreme racing thingy one)
no washers for anti-squat
3 washers under stud
middle hole on hub
-1 camber

80g of lead between lipo.
Ran BB green mini spikes in round 1, 2 and 3. Then BB green mini pins in round 4 and took another few seconds off my FTD.
schu green foams all day.

[blue_pinky]

Not sure of the finer points of my set up without looking at it, but a few bits I can think of for starters...

Front
35wt Oil
Red/orange Losi pistons in Associated shocks
Silver/blue springs

Rear
25wt
Red Losi pistons in Associated shocks
Silver springs
Rude bits brass battery tray and battery straps (with Vampire 4400 saddles)

Kit spur with about a 21 tooth pinion on a Ballistic 6.5

That's about what I've been running indoors, and at the nationals so far this year. I'll take a look properly and post it when I can.

[Body Paint]

Front:

silver spring

losi red piston or associated #2

40 wt oil

middle hole on tower

outer hole on wishbone

2 washers under ballstud on top deck.

Rear:

silver spring

losi orange piston or assoc #1

30wt oil

inside on tower

inside on wishbone

3 washers under ball stud on top deck

medium wheel base

metal lipo tray and straps are also a must, failing that stick some lead between the lipos and on top of the straps.

[gnr racer]

Thank you guys much apreciated