|
|
#1
|
|||
|
|||
Lipos, how to get approval.
Anyone know what the procedure is to get lipos approved on the BRCA list?
I've heard it costs £40? I've been talking with a few people about putting a few quid in each to get lower cost lipos approved. It'll save us all money in the long run over having to buy the much higher cost big brand cells. I just don't know where to start. |
#2
|
|||
|
|||
You need to contact Paul Worsley. Paul's contact details are in the BRCA handbook.
Neil |
#3
|
||||
|
||||
Read this:
http://www.brca.org/content/electric-board/1396 and this: http://www.brca.org/content/battery-...procedure/1399 G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing Last edited by Col; 05-02-2014 at 08:53 PM. |
#4
|
||||
|
||||
I'm sure you have to be an importer and that's the point as long as there are uk sellers and after sales service the addition may only be £40
I could be very wrong but sure I read it somewhere |
#5
|
||||
|
||||
i looked at a few of the new shorty packs and some no one sells in the uk lol.
|
#6
|
||||
|
||||
id love to do this too
get the Turnigy Nanotechs Saddle/shorty packs approved very popular and cheap too shame these cant be used a regionals/nationals though
__________________
BMRCC Member TLR 22 2.0 Speed Passion Sanwa SMC |
#7
|
||||
|
||||
It's not the money that is the issue...it's all supporting information and manufacturing data that you won't be able to deal with!
Part of the process is to get some base line safety, quality control and responsibility in place for a technology that has some degree of volatility to it. So unless you want to start digging around with the manufacturers and how they make the cheap cells...and then take responsibility for them in the long term...you really have no hope! Product certification in all industries is an absolute mine field...although this one will be relatively simple compared to a lot of other consumer/medical/industrial standards, you really won't want to go there! There is a reason cheap cells aren't on that list...and are cheap!
__________________
AKA: Andy Nancollis 1/10th drives: Yokomo BMax2MR & BMax4 1/16th drive: Carisma GTB Racing in South West: http://www.mendiprcraceway.co.uk/ Racing in Wales: www.caldicotrcracers.co.uk Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk Shells by Square Crabs |
#8
|
|||
|
|||
Why are they (nano tech cells) ROAR approved then?
|
|
|