|
#1
|
|||
|
|||
ANSMANN X4TE UPGRADES??
Hi everyone! i need some upgrades for my x4te, hubs and what not ali ones if possible! does anyone no of any upgrades for these buggys?
|
#2
|
||||
|
||||
Need or want, lol ?
Here's SMD's list of option Team C (Ansmann) parts for 2 & 4wd: http://www.smddirect.co.uk/team-c-2/...e-64/index-all Just finishing building an X4te, only planned upgrades as & when needed will be carbide diff balls & possibly the spur gear, i'm also using Kyosho wheels instead of the kit ones.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#3
|
||||
|
||||
The team c geard diffs are a good upgrade,
I'm running the Durango 410 rear hubs what are stronger than the kit ones Carbide diff balls if you stick with ball diffs you could also use the team c upgraded ball diffs
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#4
|
||||
|
||||
They cost nearly what I paid for the complete kit
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#5
|
||||
|
||||
Personnally you don't need a lot, I've the x4pro and I've only upgraded the front hinge pin holders and diff gears to kevlar. U may need the anti roll bar kit, kevlar spur gear and that's about it. Oh and some spare hinge pins
__________________
Website: http://www.wbmcc.co.uk/bingham-model-raceway.html Schumacher Cat Xls, Rc10 Team(retired), Mardave Cobra, SST 98 Rally Car, TT02 Rally car, Wpl-c24 and Element Enduro builders kit #71 #deaddogracing Autocare, unit 5 candleby Court, Cotgrave NG123RT. |
#6
|
||||
|
||||
the only upgrades i used last year where metal caster bevel gears and thats pretty much it.
best thing you can to is cut a slit lenght ways in the rear top deck and remove side pods and replace with lexan side pods
__________________
Schumacher KF2 SE Schumacher K2 Schumacher Racing, MB Models and Rc Genius |
#7
|
||||
|
||||
I've already cut the upper rear deck. Interesting regarding ditching the plastic side pods, the car comes with an undertray, i guess this alone would work for giving protection to the electrics etc (or is this what you mean by replacing them with lexan ie, the undertray ?)
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
#8
|
||||
|
||||
I took of the standard side pods and cut the sides off an undertray and screwed them to chassis I then used a brass lipo cradle to keep cells in place
__________________
Schumacher KF2 SE Schumacher K2 Schumacher Racing, MB Models and Rc Genius |
#9
|
||||
|
||||
Oh yeah, I forgot about the saddles, lol.
I may have a look into not using the side pods, though I will drive it for a while beforehand.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R http://www.norfolkbuggyclub.moonfruit.com/ |
|
|