|
#1
|
|||
|
|||
sand in spur
Well the x6 cubed was great out today at barham track drove great all day apart from a broken servo gears. One thing that for second time out side I killed a spur and pinion from haveing sand in it. I have a undertray and body is cut as tight as I can get it but its still getting in there. Is there going be an option part soon so I can get a gear cover as its getting expensive for pinions and spurs.
|
#2
|
||||
|
||||
Infest, go on RCTech.net to our main thread and ask for Speedy Dad. He makes a CF motor plate that accepts the B4 gear cover.
http://www.rctech.net/forum/electric...tor-mafia.html |
#3
|
|||
|
|||
If you are using alloy pinions, I find they are much more susceptible to sand/grit damage than steel, which in turn damages the tooth profile, whcih chews the spur. Using steel pinions, the damaging effects on the pinion and spur are less and I usually just have to flick out the odd embedded grain from the plastic spur.
For the cost of 1 pinion, its an fairly cheap and rapid way to test for an improvement. HTH |
#4
|
|||
|
|||
Quote:
|
#5
|
|||
|
|||
Quote:
|
|
|