X4TE Set Up

[steve-thebabystore]

Just finishing the build and obviously will run on kit settings to start but what seems to work for most people?
Mainly driving on astro.

[mattybucks]

I'm sure Alec will be on here later to post his setup. I know he's swapped the diff gears to metal ones as I ordered them in for him, and done a few other mods. Looks like quite a good car. I was impressed with the X2C.

[steve-thebabystore]

What metal gears and how much do you charge? Also are they needed or just a 'team option' part?

[mattybucks]

Originally Posted by steve-thebabystore

What metal gears and how much do you charge? Also are they needed or just a 'team option' part?

I think a couple of guys have shredded the diff gears, this prevents that from happening. They are off a Caster car but fit as direct replacement. They are £17.50 each set and you need two sets.

Thanks

Matt

[MK Racing]

These are the gears that I have supplied to some on the guys running Ansmann, not sure if they use both or just the pinion:
http://www.m-k-racing.com/product_in...cturers_id=105

Marc

[RogerM]

Speak to Jason Bennet, he found a solution to the diff stripping problems .... basically throw the instructions away and shim them as if it was a Predator ... job done!

[MikePimlott]

Ive been running the car nearly every weekend for over 4 months now and have not had a single gear fail. Still on kit gears.

Optional gears are just hop ups, Ansmann do a kevlar gear set which would aid lifetime but i guess the caster ones are fit and forget.

And ill try and get my setup online when im infront of car

[steve-thebabystore]

Thanks so far guys

[budgio]

The X4TE doesnt seem to have the problem with the diff/bevel gears like the X4-Pro had.
Mine has also been used every week for the last 5 months with no probs whatsoever,pretty much bullet proof stuff.

I,m using the kit settings, indoor carpet mainly.

[Dave Dodd]

I went through 2 diff gears in one day in my X4pro (rear diff only) but i put that down to using a different grease

had no problems before or since

have since changed the rear gearbox case to the X4Te, which has improved drive

[steve-thebabystore]

Damn this things quick, need to settle the handling more to my liking, seems susceptible to roll at high speed but I don't want to disturb the slower speed handling - do the roll bars work?

[madmax]

im running the pro version but but dont have a problem with grip role at high speed. but as u run at bury the grip is mental their. im probably gonna run at bury next week and could help you with a setup.