What speedo in a 22

[deano43]

Hi guys to be a pain in ass I asked earlier about a servo which i decided to get the savox 1251 but I am a little concerned about space in the 22 so what sped do,s are you 22 guys running and were do u mount the I.e the 2 options behind the motor were losi suggest or behind the servo , if behind the motor can you get a fan on the speedo or does the body get in the way ect or behind the servo can you fit a normal sized receiver there as well look forward to your replies. Regards. Deano

[marvinpaul]

i drive a Orion speedo (r10) and also an orion servo VDS 1009, it's tight but it works ;D

[Ruffy]

I use a Savox 1251MG Low Profile servo, so it leaves plenty of room, and the Orion R10 Pro.

[uijui]

KO RSX Hc and Nosram Pearl ISTC v2. Can be mounted behind servo in combination KO 409s receiver.

[zleader]

I had a hobbywing jammed in my 22. I recently replaced it with a viper 10r. Amazing unit. Great foot print, as my 22 is mid motor.

[deano43]

Me car has just arrived and tried me original servo which is a full sized Orion & I couldn't even fit a speedpassion v1.1 speedo in it ( the speedpassion is the same size as the latest version ) also me savox 1251 is on its way and me receiver is fitted against the battery stop on its side which takes up 11mm of space but what speedo do I get to fit in the car to run a speedpassion v3 7.5t motor please help I am struggling to work this one out thanks in advance deano

[Terry2010]

Hi I'm running a spektrum low profile servo in my 22 with loads of space, but I have put my speedo on the mounting plate on top of the motor I am running the tekin Rs pro it fits perfect under the shell, plus puts more weight on the rear for more traction. Great setup and excerlent speedo

[deano43]

Yes I very interested in a tekin rs pro too

[Delves]

I'm running an LRP SXX TC V2 ESC in my 22 and it is great! I have the ESC placed behind a low profile 6070 Spektrum Servo and infront of the cells. I have managed to get the receiver and the power caps all in this space too... pretty tight but looks super neat

[deano43]

Well I got a Nosram pearl without the heatsink and it fits perfect and me receiver too so the car is almost sorted and away I go racing yipee

[B4 Sloth]

Here is my 22, with Speed passion Gt2, using a sanwa rx431, savox low pro servo. This lot would have fit in in various positions. Much more room doing the mod and it looks better too