|
||
|
 |
|
||||||||||||||||||
|
#1
12-03-2012
|
|||
|
|||
Dex410 V3 servo arm
I bought one of the team Durango aluminium servo arms for the Savox servo. I thought it would be a direct replacement of the kit one. When it's fitted with the servo in place it seems to catch on the centre driveshaft slightly. Just wondered if anyone else has had this problem and is there an alternative. Cheers
|
|
#2
12-03-2012
|
||||
|
||||
|
The TD Aluminium servo arm is not really for the DEX410 or DEX210 its for the DNX408 / DEX408 / DNX408T.
The arm length is much longer on the aluminium arm than the 19mm arm on the DEX410. You could try the shorter of the two holes and remove excess material from the horn once you are satisfied. To this day though I have never seen the need to put an alloy arm on the 410. I tend to use the horn that comes with the servo or the kit item.
__________________
5 Time Oople Invernational SC Champion. Powered by OptiPower Do, or do not, there is no try! 
|
 |
|
|
Team Durango
Linear Mode
